6.4. Personal info

The artefact blocks in this tab allow you to include information that you provided in the profile into your portfolio. If you want to make changes to the text or the images, go to Content → Profile.

Furthermore, you can also put certain blocks on your profile page that only exist for that particular page:

  • My friends
  • My groups
  • My pages
  • Wall

6.4.1. My friends

Add the friends block

Add a block that displays your friends’ profile pictures and their names to your profile page. This is a default block on your profile page.

You only need to place the block on your profile page. There is no further configuration possible.

6.4.2. My groups

Add the groups block

Add a block that displays your groups on your profile page. It is a standard profile page block. new in Mahara 1.10 You can decide on the sort order of the groups and also limit the number of groups to be shown before a paginator is displayed.

Configure the block My groups

Configure the My groups block

  1. Sort groups: Decide in which sort order your groups should be displayed:
    • Most recently joined: Groups are displayed in chronologically reverse order to show the groups that you joined recently first.
    • Earliest joined: This option displays your groups in the order in which you joined them.
    • A to Z: Alphabetically from A to Z. This is the default option.
  2. Maximum number of groups to display: Decide how many groups you wish to display in the block before the paginator is shown and the remaining pages can be seen on the next page within the block. Leave this field empty if you wish to display all your groups.
  3. Retractable: Tick this checkbox if you want to allow users to reduce the block to its heading on a page. The user can click the Retractable icon retractable to just show the heading.
  4. Automatically retract: Tick this checkbox if you want to show only the block’s heading when a user views the page. The user can click the Retracted icon retracted to view the entire block.
  5. Click the Save button to accept your changes, or click the Cancel button to leave the block’s content as it is. The Remove button is shown only when you place the block into the page for the first time.
  6. You can also click the Close button close in the top right-hand corner to either remove a newly created block before it is being saved or to cancel any changes and leave the block’s content as it is.

6.4.3. My pages

Add the pages block

Add a block that displays your pages on your profile page. It is a standard profile page block. This block should stay on your profile page because other users can see all your pages to which they have acceess.

You only need to place the block on your profile page. There is no further configuration possible.

Note

When other users view your profile page, they only see the pages to which they have access. That also means that you see all your pages while others may see none or just a few.

6.4.4. Profile information

Add profile fields

Add a block with profile fields to your page.

Note

Only display as much information as you wish anybody to see. Especially when you make your pages available to the public, i.e. everybody on the Internet, or all logged-in users, decide carefully whether you want to display your street address and / or phone number.

Configure the block Profile information

Configure the Profile information block

  1. Block title: Choose a title for your block.
  2. Fields to show: Decide which fields shall appear on the page. Put a check mark in front of each one that you want to show. Displayed are only the ones for which you provided content.
  3. Profile picture: Choose to display one of your profile pictures or none.
  4. Email address Decide whether to display one of your email addresses that you have entered in your profile under Content.
  5. Introduction text: If you do not want to display the introduction text from your profile, you can write another one just for this page here. However, it will be lost when you delete this block.
  6. Retractable: Tick this checkbox if you want to allow users to reduce the block to its heading on a page. The user can click the Retractable icon retractable to just show the heading.
  7. Automatically retract: Tick this checkbox if you want to show only the block’s heading when a user views the page. The user can click the Retracted icon retracted to view the entire block.
  8. Click the Save button to accept your changes, or click the Cancel button to leave the block’s content as it is. The Remove button is shown only when you place the block into the page for the first time.
  9. You can also click the Close button close in the top right-hand corner to either remove a newly created block before it is being saved or to cancel any changes and leave the block’s content as it is.

6.4.5. new in Mahara 1.10 Social media

Add social media networks

Add a block with links to your social networks to your page.

Configure the block "Social media"

Configure the Social media block

  1. Block title: Choose a title for your block.

  2. Social media accounts to show: Decide which accounts shall appear on the page. Put a check mark in front of each one that you want to show. Displayed are only the ones for which you provided content.

  3. Display settings: Click this link to show the possible display settings.

  4. Display social media accounts as: Decide which way you want to display the links to your social media accounts:

    • Buttons with icons only: Show only the logos of the social media accounts. This option is a good one if you have lots of accounts and want to save space on your page. However, it might be trickier for people to know instantly which accounts are displayed if they are not familiar with the logos.

    Note

    If you added a lot of social media accounts through the option “Other”, this option here would not be a good one as the logo for all the services is just a generic icon.

    • Buttons with icons and text: This is the default option. The logo of the social network is displayed along with its name.
    • Buttons with text only: This option only displays the name of the social network.
  5. Display default email link as button? Tick this checkbox if you want to provide a button for your primary email address.

  6. Retractable: Tick this checkbox if you want to allow users to reduce the block to its heading on a page. The user can click the Retractable icon retractable to just show the heading.

  7. Automatically retract: Tick this checkbox if you want to show only the block’s heading when a user views the page. The user can click the Retracted icon retracted to view the entire block.

  8. Click the Save button to accept your changes, or click the Cancel button to leave the block’s content as it is. The Remove button is shown only when you place the block into the page for the first time.

  9. You can also click the Close button close in the top right-hand corner to either remove a newly created block before it is being saved or to cancel any changes and leave the block’s content as it is.

This is how the individual options are displayed on your page.

The 3 options for displaying your social media accounts

The 3 options for displaying your social media accounts

  1. Buttons with icons only.
  2. Buttons with icons and text.
  3. Buttons with text only.

6.4.6. Wall

Add the wall block

Add a block that displays your wall on your profile page. It is a standard profile page block. Other users can leave messages for you, i.e. write on your wall, and they can decide whether everyone looking at your profile page can see them or only they and you.

You only need to place the block on your profile page. There is no further configuration possible.

When you view your wall (or someone else’s wall) on your profile page, you see the following.

A wall on a profile page

A wall on a profile page

  1. Enter your message in the text box. You can use BBCode to format your message.

    Note

    BBCode gives you a way to include formatting like bold or italics in your messages.

    For example, to make a word bold, you would write it like this: [b]hello[/b]. In your message, the word will show up as hello. The BBCode markers - the [b] and [/b] - disappear.

    The following BBCodes are available:

    • [b] and [/b] to make words bold - e.g. [b]ponies[/b].
    • [i] and [/i] to make words italic - e.g. [i]amazing![/i].
    • [img] and [/img] to insert an image - e.g. [img]http://mahara.org/favicon.ico[/img]
    • [url] and [/url] to insert a link - e.g. [url]http://google.co.nz[/url] or [url=http://google.co.nz/]Google[/url]

    Links in your message are automatically clickable.

  2. Make your post private: Decide who shall see your wall post. If you make it private, only you and the person to whose wall you are posting will see the post.

  3. Click the Post button to add your message to the wall.

  4. A wall post always contains the name of the person who made the post, the date and the actual message. Wall posts that ae private are highlighted in a special color / pattern. In the default theme it red stripes.

  5. A public wall post can be viewed by anyone who has access to the profile page.

  6. Click the Delete button delete if you do not want to have a specific post on your wall. The post authors and you as owner of your wall can delete posts.

  7. Click the View whole wall link to see older wall posts.

6.4.7. Résumé

You can display either your entire résumé or parts of it in any portfolio page. If you choose to display only parts of your résumé, you have more control over the arrangement of the information.

6.4.7.1. My entire résumé

Add your entire résumé to your page

Add a block with your entire résumé to your page.

Configure the block "My entire résumé"

Configure the My entire résumé block

  1. Block title: Choose a title for your block.
  2. Retractable: Tick this checkbox if you want to allow users to reduce the block to its heading on a page. The user can click the Retractable icon retractable to just show the heading.
  3. Automatically retract: Tick this checkbox if you want to show only the block’s heading when a user views the page. The user can click the Retracted icon retracted to view the entire block.
  4. Click the Save button to accept your changes, or click the Cancel button to leave the block’s content as it is. The Remove button is shown only when you place the block into the page for the first time.
  5. You can also click the Close button close in the top right-hand corner to either remove a newly created block before it is being saved or to cancel any changes and leave the block’s content as it is.

Note

When you use this block, you do not have control over the order in which the information is displayed, but Mahara decides that. In order to be more flexible, you can choose to display one résumé field at a time with the next block.

6.4.7.2. One résumé field

Add one résumé field to your page

Add a block with one résumé field to your page.

Configure the block One résumé field

Configure the One résumé field block

  1. Block title: The title of the résumé field you want to display is chosen automatically unless you provide a different one.
  2. Field to show: Choose the résumé information that you want to display. You can select one area at a time.
  3. You can jump to the résumé section directly from this pop-up window in order to fill in more content.
  4. Retractable: Tick this checkbox if you want to allow users to reduce the block to its heading on a page. The user can click the Retractable icon retractable to just show the heading.
  5. Automatically retract: Tick this checkbox if you want to show only the block’s heading when a user views the page. The user can click the Retracted icon retracted to view the entire block.
  6. Click the Save button to accept your changes, or click the Cancel button to leave the block’s content as it is. The Remove button is shown only when you place the block into the page for the first time.
  7. You can also click the Close button close in the top right-hand corner to either remove a newly created block before it is being saved or to cancel any changes and leave the block’s content as it is.