11.6. Institutionen

Administration menu → Institutions

You can use Mahara as multi-tenanted instance. That means that several different institutions can share one Mahara installation. All account holders from these different institutions can:

  • Portfolioansichten für andere freigeben

  • Feedback zu Ansichten anderer geben

  • in Gruppen über Institutionsgrenzen hinweg arbeiten

In Administration you can set up as many institutions as you wish. Institution administrators can only administer their members and their institutions but not make any changes to site settings.

Sie können Institutionen auch für verschiedene Teile Ihrer Organisation einrichten, unterschiedliche Grundeinstellungen wählen, verschiedene Authentifizierungsmethoden nutzen oder unterschiedliche Themes verwenden.

Bemerkung

Even if you use Mahara with one organisation only and do not want to distinguish different departments within your organisation, we recommend you set up at least one institution and not use ‚No institution‘. By setting up at least one institution you will have two more roles available: institution staff and institution administrator.

You can create institution administrator accounts which are less powerful than the site administrator accounts. By having institution administrators, you can allow them to take care of account creation and group creation etc. without giving them full powers over the site preventing that too many people can make site changes.

11.6.1. Übersicht

Administration menu → Institutions → Settings

Sie sehen eine Übersicht der bestehenden Insitutionen in Ihrer Mahara-Installation (als Site-Administrator) oder zu denen Sie mit der Rolle Site-Administrator Zugriff haben.

Bemerkung

Institution administrators who manage only one institution do not see this page and are taken immediately to the settings for their only institution.

Übersicht für Institutionen

Übersicht für Institutionen

  1. Suche: Suchen nach einer bestimmten Institution anhand ihres Namens und klicken Sie auf den Suchen-Button.

  2. Klicken Sie auf den Institution hinzufügen-Button wenn Sie eine neue Institution anlegen wollen. Den Button sehen nur Site-Administratoren.

  3. Click the Edit with three dots button to edit institution members, staff and administrators.

  4. Institution: Institutionen werden alphabetisch aufgelistet. Wenn Sie auf den Institutionsnamen klicken, kommen Sie zur Kontaktseite.

  5. Mitglieder: Anzahl registrierter Mitglieder der Institution.

  6. Maximum: Maximum allowed members in this institution. If an institution has a maximum set and it is reached, any new members will be rejected. The site administrator and institution administrator receive a notification to take further steps.

  7. Mitarbeiter: Anzahl der Mitglieder der Institution mit Mitarbeiterrechten.

  8. Administratoren: Anzahl der Institutionsmitglieder mit Administratorenrechten.

  9. Click the Manage icon to change institution settings.

  10. Click the Delete icon to delete an institution. You can only delete an institution when there are no members in it.

Bemerkung

The institution ‚No institution‘ is the default ‚institution‘. It cannot be deleted as it is the standard Mahara site.

11.6.2. Eine Institution hinzufügen

Bemerkung

Nur Site-Administratoren können Institutionen hinzufügen. Wenn eine Institution angelegt wurde, können Institutionsadministratoren viele Einstellungen ändern.

When you want to add an institution by clicking the Add institution button on Administration menu → Institutions → Settings, you need to provide some basic information for the new institution. You can change all settings later on.

Eine neue Institution hinzufügen

Eine neue Institution hinzufügen

  1. Institution name: This field is required. It is the name that everyone sees throughout the site to identify this institution.

    Bemerkung

    An internal ID for the institution is generated automatically. It is displayed on the institution’s settings page once the institution has been saved for the first time.

    new in Mahara 20.04 This short name can contain letters and numbers and must be at minimum one character long. This is helpful when institutions are created automatically based on an IdP setup.

    institution shortname

  2. Institution expiry date: Click into the field to select a date. If you leave the field empty, the institution does not have an expiry date.

    • Wenn Sie ein Ablaufdatum für die Institution festgelegt haben, kann an den Site Adminstrator und die Institutionsadministratoren vor Ablauf der Institution eine Nachricht versandt werden.

    • If the auto-suspend expired institutions option is set, then once the expiry date has been reached, this institution will be suspended automatically, and members of this institution will no longer be able to log in.

    • The warning time for institution expiry and the auto-suspend expired institutions options can be found in the institution settings under Administration menu → Configure site → Site options.

  3. Registration allowed: Switch to ‚Yes‘ when you want to allow self-registration for people. As institution administrators, you will be asked to confirm that these people can join your institution. If you decline, their new account will be associated with ‚No institution‘ unless you have the Confirm registration option enabled. When you do not allow registration, nobody can register a new account, ask to join your institution or leave it without your permission.

  4. Confirm registration: Switch to ‚Yes‘ if you want to control that no new accounts are created unless the administrator approves the registration. You receive a notification about pending registrations when a new person wants to register. If the site administrator requires all institutions to confirm registration, you cannot change this setting to ‚No‘.

    Bemerkung

    Switching this setting on is recommended for most sites that allow self-registration to prevent spammers from creating accounts and misusing the site.

    When registration needs to be confirmed, people trying to register with an institution need to provide a reason.

  5. Default membership period: You can set how long members will remain associated with this institution per default. Choose an option from the drop-down menu and then specify the number of days, weeks, months or years. After this length of time, the members will be removed from the institution. People will receive a notification before this time reminding them that they will be removed soon. However, that does not mean that they will lose their account. They will still have that and be associated with ‚No institution‘.

  6. Language: Choose the language from the drop-down menu that you want the members in your institution to use by default.

    Bemerkung

    This is a default setting. Members in your institution can choose their own language in their account setting.

  7. Logo: Sie können ein Bild als Logo hochladen. Dieses wird Ihren Mitgliedern an Stelle des Standard-Logos im Kopfbereich angezeigt werden.

  8. Mobile logo: Upload a square version of your logo that is displayed on small devices.

    Bemerkung

    You can also upload a mobile logo to your theme if you prefer to add it there rather than upload it in the institution settings. The ‚Raw‘ theme has a mobile logo that is used in other themes as well unless you upload your own. Ensure that it is a square logo for best results.

  9. Theme: Use the drop-down menu to choose the theme that you wish to use for this institution. All pages in that institution will receive that theme. When members from other institutions view portfolio pages that were created in this institution, they will see this institution’s theme on these pages. If Site default is selected, when a site administrator changes the site default theme, the theme for the members of this institution will change, too. You can install more themes in the theme folder on the server. Check out the community-contributed themes. If authors are allowed to have page themes, these pages are not affected by theme changes. Mahara also has a configurable theme which allows you to create a theme on the fly.

  10. Page skins: Switch to ‚Yes‘ if you want your institution members to use page skins.

    Bemerkung

    This feature is only available when the server administrator enabled skins for the site.

  11. Comment sort order: Decide on the sort order of comments on artefacts when they are displayed on a page. You can choose between the following:

    • Früheste: Chronologische Sortierfolge mit den ältesten Beiträgen zuerst.

    • Letzte: Chronologische Sortierfolge mit den jüngsten Beiträgen zuerst.

  12. Threaded comments: Display comments on a page in a threaded manner so you can see easily which comment is a reply to which previous comment.

  13. Show who is online: If the site administrator allowed the ‚Show who is online‘ side block, you can decide which group of people you want to have displayed for this institution:

    • None: The side block is not displayed to institution members.

    • Institution only: Only institution members are displayed in the side block.

    • All: Everyone on the site are displayed in the side block. This option is only available if ‚Isolated institutions‘ is not turned on.

  14. Require license information: Switch to ‚Yes‘ if your institution members need to choose a license for each artefact they upload or create. They can set a default license in their account settings. You only see this option if the site administrator turned on License metadata in the site settings.

  15. Default license: You can choose a default license for your institution members‘ content. They can overwrite this default license in their account settings. You only see this option if the site administrator turned on License metadata in the site settings. If the site administrator allowed custom licenses, you can enter one using the drop-down menu option ‚Other license (enter URL)‘. This license can then also be used by your institution members.

    Bemerkung

    Wenn Sie sich nicht sicher sind, welche Standardlizenz für Ihre Institution am besten geeignet ist, fragen Sie den Rechtsanwalt Ihrer Institution oder einen Urheberrechtsspezialisten.

  16. Default quota: You can set the amount of file quota new members registering with this institution shall have.

  17. Update account quotas: Switch to ‚Yes‘ if you want to apply the default quota you choose above to all existing institution members.

  18. Allow public institution portfolios: Switch to ‚Yes‘ if you want to allow members belonging to this institution to create portfolio pages and collections that are accessible to the public rather than only to registered people. If you allow public pages, members can also create secret URLs for their pages. Otherwise they cannot.

  19. Maximum number of accounts allowed: Specify the maximum number of accounts that can be created in this institution. If you leave this field blank, there is no limit to the number of accounts.

    Bemerkung

    When the maximum number of accounts has been reached and another person tries to register for the institution, the site administrator as well as the institution administrator for that institution receive a notification. That allows them to take further steps.

  20. Allow SmartEvidence: Activate SmartEvidence if you want your institution members to work with it.

  21. Allow institution tags: If set to ‚Yes‘, you can set up tags for the members of your institution to use in their portfolios.

    Bemerkung

    When turned on, the new menu item Tags will appear in the institution sub menu.

  22. Review accounts before self-deletion: If set to ‚Yes‘, an institution administrator needs to approve or deny the deletion of an account when the deletion is initiated by the account holder.

    Bemerkung

    This setting gives institutions in a formal learning setting the possibility to prevent accidental account deletion by people before portfolios are archived if required.

    If the field is set to ‚Yes‘ and greyed out, the site administrator requires the confirmation for all institutions on the site.

  23. Locked fields: Switch any value to ‚Yes‘ if you don’t want to allow changes to it by members. Disabled switches are for profile fields which are locked in the institution settings for ‚No institution‘. These profile fields are locked at the site level and cannot be unlocked for individual institutions.

    Bemerkung

    Locking profile fields such as first name, last name and display name can be beneficial for institutions that wish to always identify their members by their real names and not allow them to choose nicknames.

  24. Click the Submit button to save your changes and create this institution, or click Cancel to abort the creation of this institution.

11.6.2.2. Konfigurierbares Theme verwenden

Wenn Sie keines der Standardthemes von Mahara oder eines der community-contributed themes verwenden wollen, können Sie entweder ein Theme von Grund auf selber erstellen oder ein konfigurierbares Theme in Verbindung mit dem Logo Upload verwenden.

If you do not upload a custom logo and use the Mahara logo with the configurable theme instead, it changes colour according to the theme background so it is always readable.

Bemerkung

The configurable theme is only a display theme. That means that members of the institution in which it is in use see the theme applied to the site and their pages. However, when members from another institution browse the portfolio pages of members from this institution, they do not see the configurable theme, but their own theme.

Sie können das konfigurierbare Theme direkt in den Institutionseinstellungen ändern.

Colour options for the configurable theme

Colour options for the configurable theme

In order to change any of the colours, either provide the hexadecimal color code or choose the colour from the colour picker that becomes available as soon as you click in one of the colour fields.

  1. Theme: Choose the “Configurable Theme” from the drop-down menu and the “Custom theme configuration” options become visible.

  2. Header background: The colour of the header. It is also used as primary button background colour.

  3. Text on header background: The colour of text in the header. It is also used as text colour on primary buttons and the navigation menu icon colour in the header.

  4. Links: The link colour on pages and in the sidebar.

  5. Kopfbereich: Farbe für alle Kopfbereiche außer der Sidebar.

  6. Navigation background: The colour of the drop-down menu navigation.

  7. Navigation text: The colour of the text / links in the navigation menu.

  8. Reset colours: Switch to ‚Yes‘ if you want to go back to the original colours of the configurable theme.

  9. Klicken Sie auf den Bestätigen-Button, um die Änderungen abzuspeichern.

Bemerkung

Wenn Sie als Mitglied der Institution nach dem Abspeichern vorgenommene Änderungen nicht direkt sehen, sollten Sie den Cache des Browsers löschen und die Seite neu laden.

Example of a configurable theme

Example of a configurable theme

Die Nummern auf der Seite beziehen sich auf die Optionen des konfigurierbaren Themes oben.

11.6.3. Die Site-Institution bearbeiten

Your Mahara site itself is listed as institution under Administration menu → Institutions → Settings. Per default, it has the name ‚No institution‘ and you can change certain settings that are applied to the site.

Bemerkung

Most settings for the site are made in Administration menu → Configure site → Site options.

Edit the 'No institution' site institution

Edit the ‚No institution‘ site institution

  1. Institution name: This field is required. It is the name that people see when registration is allowed for the site without having to register for a particular institution.

  2. Institution short name: This name is generated automatically and set to ‚mahara‘.

  3. Authentifizierungs-Plugin: Sie können festlegen welche Authentifizierungsmethode Sie zulassen wollen. Siehe Eine Institution bearbeiten für weitere Informationen.

  4. Registration allowed: Switch this option to ‚Yes‘ if you want to allow people to register on your site without registering for a particular institution. If you switch this setting on but not the setting Confirm registration, new accounts do not need approval.

    Bemerkung

    Be careful disabling Confirm registration. Spammers can misuse your site and simply create accounts without your knowledge.

  5. Confirm registration: Switch this option to ‚Yes‘ if you want to control that no new accounts are created unless the site administrator approves the registration. You receive a notification about pending registrations when a new person wants to register.

  6. Logo: Here you can replace the standard site logo without having to place it in the theme folder on the server. You can upload an image that will be displayed to everyone who is not in an institution.

  7. Mobile logo: Upload a square version of your logo that is displayed on small devices.

  8. Page skins: Switch this option on if you want people who are not in a particular institution to use page skins.

    Bemerkung

    This feature is only available when the server administrator enabled skins for the site.

  9. Comment sort order: Decide on the sort order of comments on artefacts when they are displayed on a page. You can choose between the following:

    • Früheste: Chronologische Sortierfolge mit den ältesten Beiträgen zuerst.

    • Letzte: Chronologische Sortierfolge mit den jüngsten Beiträgen zuerst.

  10. Threaded comments: Display comments on a page in a threaded manner so you can see easily which comment is a reply to which previous comment.

  11. Allow SmartEvidence: Activate SmartEvidence if you want your institution members to work with it.

  12. Allow institution tags: If set to ‚Yes‘, you can set up tags for the members of your institution to use in their portfolios.

    Bemerkung

    When turned on, the new menu item Tags will appear in the institution sub menu.

  13. Review accounts before self-deletion: If set to ‚Yes‘, the site administrator needs to approve or deny the deletion of an account that is not in associated with an institution when the deletion is initiated by the account holder.

  14. Locked fields: Switch any value to ‚Yes‘ if you don’t want to allow changes to it by people. Any field that you enable here is locked from editing in institutions.

    Bemerkung

    Locking profile fields such as first name, last name and display name can be beneficial for institutions that wish to always identify their members by their real names and not allow members to choose nicknames.

  15. Click the Submit button to save your changes, or click Cancel to discard your changes.

11.6.4. Eine Institution bearbeiten

Administration menu → Institutions → Settings → Click the Manage icon next to an institution

Once you have created your institution, you can edit its settings, suspend or delete the institution. You will have to choose at least one authentication method for this institution so that accounts can be created.

Bemerkung

Nur Site-Administrator/innen können Authentifizierungsmethoden für Institutionen hinzufügen, bearbeiten, löschen und sperren. Eine Institution kann erst gelöscht werden, wenn alle Mitglieder entfernt wurden.

You should set up at least one authentication method. Otherwise, nobody can log in to this institution. You can add multiple authentication methods to your institution to account for different members and how they are allowed to authenticate. That means for example for a university:

  • Lehrende und Studierende können sich mit ihrem Standard-Logindaten und Kennwort aus LDAP / Active Directory (LDAP authentication) oder Single Sign-on über SAML (SAML authentication) einloggen.

  • Sie können sich aber auch über Moodle einloggen. Dies kann als sekundäre Authentifizierung zu LDAP oder Single Sign on gesetzt werden (XML-RPC / MNet authentication).

  • Für Alumni können die MNet / LDAP Authentifizierungszugänge gegen interne Authentifizierung getauscht werden wenn sie ihr Studium abgeschlossen haben.

  • Externe Nutzer, die keinen Hochschulzugang bekommen sollen, können intern authentifiziert werden. Dafür benötigen sie dann an keiner anderen Stelle der Hochschul-IT einen Nutzerzugang.

All these then still log in to the same Mahara institution. Alternatively, you could also separate the accounts into their own institutions on your Mahara installation if that is more appropriate for your use case. This could mean for the above example:

  • Faculty and students log in and are automatically placed into the institution ‚University‘. They see the standard university theme.

  • Alumni are placed into the institution ‚Alumni‘ for easier account management as you could have the alumni coordinator manage these. Having them in a separate institution on Mahara would make it easy to see who an alumni is. Additionally, they could receive a slightly different university theme that is geared towards alumni, and they can also receive different messages on their dashboard.

  • External assessors who are placed into the separate institution ‚Assessors‘ could be administered easily by an administrator who is the liaison for them without giving that administrator access to the account management of all other university members. They can receive the standard university theme, but receive different messages on their dashboard.

Bevor Sie IMAP, LDAP, SAML oder XML-RPC Authentifizierungsmethoden verwenden können, müssen dafür erforderliche Erweiterungen auf dem Server bereitgestelltwerden.

Plugins zur Authentifizierung in Institutionen

Plugins zur Authentifizierung in Institutionen

  1. Once your institution is created, the settings include an additional option, Authentication plugin. You see all authentication methods that are already in use for this institution.

  2. Wählen Sie aus dem Drop-down-Menü eine der verfügbaren Methoden aus:

  3. Klicken Sie auf den Hinzufügen-Button, um den Konfigurationsbereich für eine externe Authentifizierungsmethode zu sehen, bevor sie aktiviert wird.

Warnung

Be careful when choosing the ‚None‘ authentication method. This allows anyone to log in. It should only be used for testing purposes.

11.6.4.1. IMAP-Authentifizierung

You can use this authentication method to receive the login information for your accounts from your IMAP server.

IMAP Authentifizierung einrichten

IMAP Authentifizierung einrichten

  1. Authentifizierungsname: Geben Sie einen beschreibenden Namen ein, um den Server zu benennen. Bevorzugt ist ein kurzer Name. Pflichtfeld.

  2. Host-Name oder -Adresse: Tragen Sie den Hostnamen als URL ein. Pflichtfeld.

  3. Port-Nummer: Tragen Sie den Port ein unter dem Ihr IMAP-Server erreicht werden kann. Standard ist 143. Pflichtfeld.

  4. Protokoll: Wählen Sie das IMAP-Protokoll durch Auswahl aus dem Pull-down-Menü. Pflichteintrag:

    • IMAP

    • IMAP/SSL

    • IMAP/SSL (selbstsigniertes Zertifikat)

    • IMAP/TLS

  5. Password-change URL: If your account holders can only change their password in one central space, provide the URL here.

  6. Click the Submit button to enable this authentication method or click Cancel to abort your changes.

11.6.4.2. LDAP-Authentifizierung

Use this authentication method to authenticate against an LDAP / Active Directory server.

LDAP Authentifizierung einrichten

LDAP Authentifizierung einrichten

  1. Authority name: Enter a descriptive name to help you identify this authentication method. Preferably, choose a short name. This field is required.

  2. Host URL: geben Sie die Host URL in dieser Form ein, z.B. ldap://ldap.example.com. Trennen Sie mehrere Server durch ein ; für eine Ausfallsicherung. Pflichtfeld.

  3. Contexts: List the contexts where accounts are located. Separate different contexts with ;, e.g. ou=users,o=org;ou=other,o=org. This field is required.

  4. User type: Select from the drop-down menu how accounts are stored in the LDAP directory. This field is required. You can choose between:

    • Novell Edirectory

    • posixAccount (rfc2307)

    • posixAccount (rfc2307bis)

    • sambaSamAccount (v. 3.0.7)

    • MS Active Directory

    • Standard

  5. User attribute: Enter the attribute used to search for accounts. It is often cn. This field is required.

  6. Search subcontexts: Select ‚Yes‘ if you want to search for the accounts also in subcontexts. This setting is required.

  7. Distinguished name: If you want to use bind-user to search accounts, specify it here. It should look something like cn=ldapuser,ou=public,o=org. Leave this blank for anonymous bind.

  8. Password: Enter the password for the ‚distinguished name‘.

  9. LDAP-Version: Wählen Sie die verwandte LDAP-Version aus dem Drop-down-Menü ein. Pflichteintrag.

  10. TLS encryption: Switch to ‚Yes‘ if you use this encryption mechanism.

  11. Update account info on login: Switch to ‚Yes‘ if you want to have the first name, last name and email address updated with the corresponding LDAP values at each login. Enabling this option may prevent some MS ActiveDirectory sites / accounts from subsequent Mahara logins.

  12. We auto-create accounts: Switch to ‚Yes‘ if you want Mahara to create accounts automatically when a person authenticates successfully but does not yet have an account.

  13. LDAP field for first name: Enter the name of the field in the LDAP record that contains the person’s first name.

  14. LDAP field for surname: Enter the name of the field in the LDAP record that contains the person’s last name.

  15. LDAP field for email: Enter the name of the field in the LDAP record that contains the person’s email address.

  16. LDAP field for student ID: Enter the name of the field in the LDAP record that contains the person’s student ID.

  17. LDAP field for display name: Enter the name of the field in the LDAP record that contains the person’s display name.

  18. User sync: Decide whether you wish to synchronize your accounts via a cron job and make additional settings.

  19. Group sync: Decide whether you want to create groups automatically in Mahara based on your LDAP groups.

  20. Click the Submit button to enable this authentication method or click Cancel to abort your changes.

11.6.4.2.1. LDAP account sync

You can set up your LDAP authentication so that account creation can be automated. Account deletion should be considered carefully.

Configure the LDAP account sync

Configure the LDAP account sync

  1. Sync accounts automatically via cron job: Enable this setting to activate a task in the cron which will automatically create and/or update accounts based on records in the LDAP server.

    Bemerkung

    By default, this cron task will execute once daily at midnight (server time). Edit the record in the ‚auth_cron‘ table or use the optional command-line script supplied at htdocs/auth/ldap/cli/sync_users.php if you wish to schedule it to run at other times or with other settings.

    This setting will have no effect if the cron is not running. See the installation guide for instructions on how to set it up.

  2. Update account info in cron: Switch to ‚Yes‘ if you wish for account information to be updated via the cron if they changed in the LDAP record.

  3. Auto-create accounts in cron: Switch to ‚Yes‘ if you want new accounts in your LDAP directory to get an account automatically.

  4. Additional LDAP filter for sync: Provide an LDAP filter here, and the sync will only see accounts in LDAP who match that filter. Example: Example: uid=user*.

    Warnung

    Use this setting with caution if you have auto-suspend or auto-delete enabled, as doing so will cause all accounts in your institution which do not match the filter to be suspended or deleted.

  5. If an account is no longer present in LDAP: Choose from the drop-down menu what you want to do if accounts are no longer in your LDAP directory:

    • Do nothing: People keep their account. This is the recommended setting.

    • Suspend account: The account will be suspended. The account holder will no longer be able to log in, and their content and pages will not be viewable. However, none of their data will be deleted, and the account can be un-suspended by the cron when their LDAP record reappears, or manually by an administrator. Alternatively, their authentication method could be changed to the Mahara internal.

    • Delete account and all content: The account will be deleted, along with all their content and pages.

      Warnung

      The automatic deletion of accounts is not recommended. The data is fully deleted from the server when an account is deleted. The account can only be restored from a backup. Some information such as friend relationships and group membership cannot be restored.

  6. Click the Submit button to enable this authentication method or click Cancel to abort your changes.

11.6.4.2.2. LDAP-Gruppensynchronisation

You can set up your LDAP authentication so that group creation can be automated. Group deletion should be considered carefully.

Den LDAP Gruppen-Sync aktivieren

Den LDAP Gruppen-Sync aktivieren

  1. Gruppen automatisch über Cron synchronisieren: Mit der Aktivierung lösen Sie eine Synchronisierung der Gruppenzugehörigkeit aufgrund von LDAP Einträgen aus. Der Cron-Job erzeugt und/oder aktualisiert die Mitgliedschaft.

    Bemerkung

    By default, this cron task will execute once daily at midnight (server time). Edit the record in the ‚auth_cron‘ table or use the optional command-line scripts supplied in htdocs/auth/ldap/cli/ if you wish to schedule it to run at other times or with other settings.

    Note: You will also need to activate the ‚Sync groups stored as LDAP objects‘ and / or ‚Sync groups stored as user attributes‘ settings in order for groups to be synced.

    Gruppenmitglieder können sowohl hinzugefügt wie auch entfernt werden. Wenn eine Gruppe nicht weiter im LDAP Datensatz gefunden wird, werden alle Mitglieder aus der Gruppe ausgetragen.

    This setting will have no effect if the cron is not running. See the installation guide for instructions on how to set it up.

  2. Auto-create missing groups: Switch to ‚Yes‘ if you want to have new groups in your LDAP directory created automatically in Mahara.

  3. Role types in auto-created groups: Decide which roles members can have in auto-created groups.

    • Kurse: Mitglieder, Tutoren und Administratoren

    • Standard: Mitglieder und Administratoren

  4. LDAP Gruppen mit diesen Namen ausschließen: Bei der automatischen Erstellung von Gruppen aus LDAP können Sie festlegen, dass Einträge mit definierten Bezeichnungen nicht als Gruppen in Mahara angelegt werden.

  5. Include only LDAP groups with these names: If you want to restrict the creation / synchronisation of your groups to a specified few, list them here.

  6. Sync groups stored as LDAP objects: Switch to ‚Yes‘ if your groups are stored as standalone records in LDAP. Example:

    dn: cn=languagestudents,ou=groups,dc=mahara,dc=org
    objectClass: groupOfUniqueNames
    cn: languagestudents
    uniqueMember: uid=user1,dc=mahara,dc=org
    uniqueMember: uid=user2,dc=mahara,dc=org
    uniqueMember: cn=frenchclass,ou=groups,dc=mahara,dc=org
  7. Gruppen-Klasse: Tragen Sie die LDAP objectclass ein, die für Gruppen erforderlich ist.

  8. Gruppenattribut: Tragen Sie das LDAP-Attribut ein, das mit den Gruppenbezeichnungen abgeglichen wird. Der Name ist häufig ‚‘cn‘‘.

  9. Gruppenmitgliedsattribut: Tragen Sie das LDAP Attribut ein in dem die Gruppenmitgliedschaft gespeichert ist. Es ist häufig ‚‘uniqueMember‘‘:

  10. Member attribute is a dn? Switch to ‚Yes‘ if each entry in the ‚Group member attribute‘ field is a ‚distinguished name‘. Disable this setting if each entry in ‚Group member attribute‘ field is a username only.

  11. Process nested group: Switch to ‚Yes‘ if your groups can contain other groups as members. If enabled, the sync process will recursively include the members of these nested groups into the parent group.

    Bemerkung

    Der Prozess wird beendet wenn er zirkuläre Referenzen entdeckt.

  12. Gruppen nur in diesen Kontexten synchronisieren: Listen Sie die Kontexte auf in denen Gruppen abgelegt sind. Trennen Sie die einzelnen Einträge mit einem Semikolon „;“. Beispiel: : ou=groups,o=org;ou=other,o=org.

    Bemerkung

    If this field is left empty, the group sync cron will fall back to using the same list of contexts as the ‚Contexts‘ setting for where accounts are located.

  13. Search subcontexts: Change to ‚Yes‘ if subcontexts should be included in the synchronisation.

  14. Sync groups stored as user attributes: Switch to ‚Yes‘ if each LDAP account record has an attribute which indicates a group the account should be in. This setting will cause the LDAP sync cron to create a group for each unique value in the specified user attribute (or in those listed in the ‚Acceptable group names‘ field), and place each person in the appropriate group (or groups, if they have multiple values for the attribute).

  15. Gruppenatribut für Nutzer ist gespeichert in: Tragen Sie das LDAP Attribut ein in dem der Name hinterlegt ist.

  16. Only these group names: When creating groups based on user attributes, only create groups with these names. This will not affect groups created via the ‚Sync groups stored as LDAP objects‘ setting, if it is active.

  17. Click the Submit button to enable this authentication method or click Cancel to abort your changes.

11.6.4.3. SAML Authentifizierung

Wählen Sie diese Authentifizierungsmethode für Ihre Institution wenn Sie einen SAML 2.0 Identiy Provider Service für Ihre Organisation verwenden, um sich mit einem Login bei mehreren Anwendungen einzuloggen.

The SAML plugin can be used to connect to ADFS as well. In order to do so, the signature algorithm needs to be set appropriately in the SAML plugin configuration.

new in Mahara 20.04 In Mahara 20.04 a range of additional fields were made available to automate institution and account setup for organisations that use SAML as their IdP. This includes:

  • Automatic setup of institutions based on a ‚parent IdP‘.

  • Role mapping for administrator and staff accounts.

  • Role mapping for an account that is to be added to all groups either in the institution or on the site.

Siehe auch

If you need to diagnose problems with accounts, you can log the attributes that the IdP passes on.

SAML 2.0 Authentifizierung

SAML 2.0 Authentifizierung

  1. Active: Set the switch to ‚Yes‘ if you want to use the IdP.

  2. Available Identity Providers: If you add your first SAML IdP, you can only enter the details. Once you have an IdP set up, you see a drop-down menu, and you can choose from them if the metadata for the institution you are setting up uses the same IdP or set up a new IdP.

    Bemerkung

    When you have more than one SAML IdP set up on your site, people wanting to log in via SSO are taken to an overview page that lists all SSO providers.

    saml discovery

    The available information to display is the logo of the service, its name, and the service provider. If you want to display your logo on the page, add the following just below the <md:IDPSSODescriptor> line and replace ‚linktothelogo‘ with the actual location of the logo:

    <md:Extensions> <mdui:UIInfo xmlns:mdui="urn:oasis:names:tc:SAML:metadata:ui"> <mdui:Logo width="120" height="30" xml:lang="en">linktothelogo</mdui:Logo> </mdui:UIInfo> </md:Extensions>

  3. Metadata URL for auto-refresh: Instead of adding the metadata directly, you can provide the URL to the metadata, which needs to be in XML format, so that changes to it are pulled automatically via cron. You would not have to update the metadata yourself when it changes.

  4. Institution Identity Provider SAML metadata: Enter the metadata from your IdP. Make sure that all information in the SAML plugin configuration is correct and that there are no server dependencies missing.

    Bemerkung

    This element requires the XML formatted metadata for the IdP that you want to connect to. If the same IdP has already been configured for another institution, then leave this blank.

    If you entered metadata in this field and also provided a link to the metadata URL, the latter takes precedence.

  5. Institution attribute (contains ‚…‘): Enter the attribute that will be passed from the Identity Provider (IdP) that shows which institution the account belongs to. This usually directly correlates to the LDAP attribute (the signin service of the IdP), e.g. eduPersonOrgDN. This field is required.

  6. Institution value to check against attribute: Enter the value that will be checked against the institution attribute value as passed from the IdP. If the institution regex switch ‚Do partial string match with institution shortname‘ is set to ‚Yes‘, this value can be a regular expression that will be used to check against the institution attribute value. This field is required.

  7. Do partial string match with institution shortname: Switch to ‚Yes‘ to treat the value in ‚Institution value to check against attribute‘ like a regular expression.

  8. Nutzerattribut: Tragen Sie den Namen des Attributs für den Nutzernamen ein, den Sie vom IdP erhalten haben. Pflichtfeld.

  9. Match username attribute to remote username: This switch is set to ‚Yes‘ by default and needs to stay on this setting. It matches the user attribute value to the remote username field assigned to a given account (not the internal Mahara username). Only if you have the experimental feature of ‚usersuniquebyusername‘ turned on can you set this switch to ‚No‘. We do not recommend this unless you are very experienced and have control over all applications in question.

    Warnung

    By default, SAML authentication instances have the ‚Match username attribute to remote username‘ setting enabled. If that setting were disabled, someone with control over any SAML identity provider could gain control over any account on that Mahara site by setting the username attribute accordingly. In other words, administrators of one institution could control members in other institutions. You would only be able to disable this setting if you set the ‚usersuniquebyusername‘ variable to ‚true‘ in config.php file. However, you should not do that on a Mahara instance to which multiple SAML providers connect and you are not in control of all usernames that are created.

    Siehe auch

    If you disable ‚Match username attribute to remote username‘, you get an error message which talks about the config setting for ‚usersuniquebyusername‘. Please refer to the experimental feature of the ‚usersuniquebyusername‘ variable for more information.

  10. Allow people to link their own account: Switch to ‚Yes‘ if you want to allow people to link their own internal Mahara account to the authenticated SAML account. This depends on the ‚Match username attribute to remote username‘ option being enabled. If this setting is turned on when people try to log in via SSO and their username as well as the email for example match an internal username, they can link their accounts. That would allow them to log in either via the SSO login or via the regular login box into the same account and avoid account duplication.

  11. Update account details on login: Switch to ‚Yes‘ to update the first name, last name, and email address with the corresponding IdP values passed through at each login.

  12. We auto-create accounts: Switch to ‚Yes‘ to create accounts on Mahara automatically when a person authenticates successfully but does not yet have an account.

    Bemerkung

    You can turn this setting now also on for multi-tenanted sites that use SAML SSO in more than one institution.

  13. SSO field for first name: Enter the name of the attribute passed by the IdP that contains the person’s first name.

  14. SSO field for surname: Enter the name of the attribute passed by the IdP that contains the person’s last name.

  15. SSO field for email: Enter the name of the attribute passed by the IdP that contains the person’s email address.

  16. SSO field for student ID: Enter the name of the attribute passed by the IdP that contains the student ID.

  17. new in Mahara 20.04 SSO field for ‚Organisation‘: Enter the name of the attribute that denotes an organisation.

  18. new in Mahara 20.04 SSO field for avatar icon: If the IdP contains base64-encoded images for a profile picture, you can enter it here.

  19. new in Mahara 20.04 SSO field for roles: Enter the name of the attribute here that passes in role information.

  20. new in Mahara 20.04 SSO field for role prefix: If the IdP passes in role information for the person logging in, then you can set this ‚prefix‘ field so that only those roles starting with the prefix should be handled by Mahara. This way the IdP can have different roles for different Service Providers (SP). If the person does not have any roles relating to this prefix, they will not be allowed to log in.

  21. new in Mahara 20.04 Role mapping for ‚Site administrator‘: Enter the name of the role that is assigned to people in the IdP who shall have site administrator permissions.

  22. new in Mahara 20.04 Role mapping for ‚Site staff‘: Enter the name of the role that is assigned to people in the IdP who shall have site staff permissions.

  23. new in Mahara 20.04 Role mapping for ‚Institution administrator‘: Enter the name of the role that is assigned to people in the IdP who shall have institution administrator permissions.

  24. new in Mahara 20.04 Role mapping for ‚institution staff‘: Enter the name of the role that is assigned to people in the IdP who shall have institution staff permissions.

    Bemerkung

    At the moment, the institution administrator and institution staff roles are only updated on account creation unless the config variable ‚usersuniquebyusername‘ is used. The site administrator and site staff roles are updated on each login. There is a wishlist item to correct that behaviour for institution administrators and staff.

  25. new in Mahara 20.04 Role mapping for ‚Auto group administration‘: Enter the name of the role that is assigned to people in the IdP who shall be added to every group in this institution per default.

    Bemerkung

    The ‚auto group administrator‘ is added to all groups - new and existing - automatically. They are also subscribed to all forums and cannot unsubscribe.

    When you set up the ‚parent‘ IdP in an institution, you have an additional setting: ‚Copy roles to all SAML authentication instances‘. That allows you to update the role mappings for all institutions based on this IdP in one go.

  26. new in Mahara 20.04 Auto group administration of all groups on the site: Set this to ‚Yes‘ if a role from a ‚parent‘ IdP shall be added to all groups on this site. This is useful if the site is very homogenous for one ogranisation or for a group of organisations that is administered centrally. If set to ‚No‘, the person is only added to the groups of this particular institution.

  27. Wrong login message: Display this message to people who try to log in via the standard login form instead of the SSO button when they are supposed to use it. This message should contain instructions on how they can gain access to Mahara through SSO.

    Bemerkung

    The message is displayed right above the login form in the sidebar. Therefore, do not make it too long.

  28. Click the Submit button to enable this authentication method or click Cancel to abort your changes.

11.6.4.4. Web services

If you want to use web services with accounts in an institution, add the web services authentication.

You need the web services authentication method if you want to allow people to connect via LTI.

You cannot configure anything for the authentication plugin, but need to do that in the Web services area.

11.6.4.5. XML-RPC / MNet Authentifizierung

Use the XML-RPC authentication for connecting a Mahara instance to a Moodle or an other Mahara installation for sharing login information. With Moodle 2 that does not only mean that you can log in to Mahara via Moodle, but also that you can transfer certain activities into your Mahara portfolio from Moodle.

Eine Moodle-Seite kann mit genau einem Mahara-System verbunden werden. Jede XML-RPC Authentifizierungsinstanz in Mahara benötigt ihre eigene individuelle wwwroot-URL-Adresse und eine Verbindung zu genau einer Mahara Institution.

Bemerkung

Sie müssen Netzwerk aktivieren, um diese Authentifizierung zu verwenden.

Die MNet Authentifizierung einrichten

Die MNet Authentifizierung einrichten

  1. Authentifizierungsname: Geben Sie einen beschreibenden Namen ein, um den Server zu benennen. Bevorzugt ist ein kurzer Name. Pflichtfeld.

  2. Active: Set the switch to ‚Yes‘ if you want to use this authentication method for the institution.

  3. WWW root: Enter the web address of the root of the remote application, e.g. https://example.com. This field is required. If your WWW root requires a specific port, enter the port number that the remote application is listening at. You probably will not need to add a port unless you are connecting to a https service or your remote application is running on a non-standard port.

  4. Site name: Enter the name to present to people to identify the remote site. If you enable SSO, they may click on this name to start a session at the remote site. This field is required.

  5. Application: Choose the application on the remote side. You can choose between ‚Mahara‘ and ‚Moodle‘.

  6. Parent authority: If you set a parent authority from the already existing authentication methods, people will be able to log in using that authority as well as MNet. For example, you could set up SAML authentication and have that be the parent of this MNet authority. That means that people will be able to log in by clicking the SSO login button using their SSO credentials as well as via MNet from their Moodle. You do not have to set a parent authority. If you do not, people using MNet will only be able to access Mahara via MNet, i.e. log in to Moodle or the other Mahara first.

    Bemerkung

    If you choose a Parent authority, ensure that all accounts are associated with this authentication method instead of the MNet one. Otherwise, they will not be able to log in via the parent authentication method. If the remote username for MNet and the other authentication method is already the same, you just need to change the authentication method. If they are not yet the same, you need to update the account details together with changing their authentication method.

  7. Wrong login message: Enter a message to display when someone tries to log in via Mahara’s login form but is not allowed to if you have not set up a parent authority.

  8. SSO-Richtung: Wählen Sie aus dem Drop-down-Menü die Richtung in der SSO funktionieren soll.

    • They SSO in: Enable this option to allow account holders from the remote site to roam to your Mahara site without having to enter their username and password. This is the most commonly used setting. The remote application is the source of the login information and where accounts are created initially. This is the default option.

    • We SSO out: Enable this option to allow your account holders to roam from Mahara to the remote site without having to enter their username and password there. Mahara is the source of the login information and where accounts are created initially. The following fields are replaced by They auto-create accounts if this option is selected.

  9. Update account info on login: Set this switch to ‚Yes‘ to bring over personal data from the remote site upon each login and update your Mahara account record with any changes. The following fields, when filled in on Moodle, are filled in Mahara:

    • First name (always carried over)

    • Last name (always carried over)

    • Email address (always carried over)

    • Profile picture

    • Description (Introduction on Mahara)

    • City

    • Country

    • Language

    • HTML-Editoreinstellung

  10. We auto-create accounts: Switch to ‚Yes‘ to create accounts on Mahara automatically when a person authenticates successfully but does not yet have an account.

  11. We import content: Not all network-enabled applications support this, but if they do, e.g. Moodle, this will allow people of the remote site to import content to Mahara. It depends on the option ‚They SSO in‘ from ‚SSO direction‘ and it is sensible to also have ‚We auto-create accounts‘ set.

  12. Click the Submit button to enable this authentication method or click Cancel to abort your changes.

  13. If the connection to the remote site is successful, the public key of the remote site will be stored with the authentication method and rotated when needed. If there is a problem and the public key does not update, you can exchange it yourself with the correct one while you are troubleshooting the underlying problem.

Siehe auch

Refer to the comprehensive guide about setting up Mahoodle, the combination of Mahara and Moodle, for step-by-step instructions on how to set everything up on the Moodle side and on Mahara. The guide explains the steps for both Moodle 1.9 and Moodle 2.x.

11.6.4.6. Reihenfolge der Authentifizierungsmethoden

Wenn Sie mehrere Authentifizierungsmethoden innerhalb einer Institution aktiviert haben, können Sie die Reihenfolge der Abfrage festlegen.

Reihenfolge der Authentifizierungsmethoden

Reihenfolge der Authentifizierungsmethoden

  1. Use the Up arrow and the Down arrow button to move a specific authentication method up or down in the list. Mahara looks for accounts of people in the order of the list.

  2. Löschen Sie eine einzelne Authentifizierungsmethode durch Anklicken des Löschen-Buttons|delete|.

Bemerkung

You cannot delete an authentication method when there are still people who require it to log in. Before deleting an authentication method, you have to move the accounts to another authentication method.

11.6.4.7. Institution sperren

Ein Site-Administrator kann eine Institution jederzeit sperren.

Suspend an institution

Sperren und Institution

Click the Suspend institution button to make an institution (temporarily) unavailable to its members.

11.6.5. Statische Seite der Institution

Administration menu → Institutions → Static pages

Institutionsadministratoren können den Inhalt von statischen Seiten, die ein Site-Administrator created erstellt hat, überschreiben. Dies sind folgende Seiten:

  • Impressum/Über

  • Startseite

  • Startseite vor Login

Alle Seiten verfügen bereits über einen Standardtext, den Sie auf Ihre Bedürfnisse anpassen oder gegen einen eigenen Text austauschen können. Die Seiten sind fest verlinkt und sollten daher mit den für Sie sinnvollen Inhalten gefüllt werden. Zur Gestaltung steht Ihnen der Editor zur Verfügung.

The terms and conditions and privacy statement pages can be found in the Legal section.

Statische Seite der Institution bearbeiten

Statische Seite der Institution bearbeiten

  1. Institution: If you are a site administrator or an institution administrator of more than one institution, choose the institution for which you want to change page content. If you administer only one institution, its name is displayed directly.

  2. Site-Name: Wählen Sie vom Drop-down-Menü die Seite aus, die Sie bearbeiten möchten.

  3. Use site default: Switch to ‚Yes‘ if you want to use the content that is displayed on the page for the entire site. Switch to ‚No‘ if you want to provide your own content.

  4. Page text: Change the text in the editor window if you selected ‚No‘. You cannot leave this field empty.

  5. Klicken Sie auf den Änderungen speichern-Button.

11.6.7. Mitglieder

Administration menu → Institutions → Members

You can add and remove members from one institution in bulk. As site administrator, you can always add members to an institution. As institution administrator, you can only invite people to become members.

You can filter accounts to display fewer and add to or remove them more easily from your institution:

  • Personen, die eine Mitgliedschaft in der Institution beantragt haben

  • Personen, die eine Mitgliedschaft in der Institution nicht beantragt haben

  • Personen, die die Institution verlassen haben

  • Personen, die bereits Mitglied der Institution sind

  • Personen, die in die Institution eingeladen wurden

Bemerkung

Sie können doppelt auf einen Namen klicken, um ihn auf die andere Seite zu verschieben. Dieses Verfahren ist bei allen ähnlichen Arbeitsprozessen verfügbar.

11.6.7.1. Personen, die eine Mitgliedschaft in der Institution beantragt haben

If your institution allows self-registration, people who are not already members of your institution can request to join it.

Institution administrators receive notifications about membership requests. Site administrators only receive notifications about people wanting to join ‚No Institution‘.

Mitgliedsanfragen von Institutionen akzeptieren oder verwerfen.

Mitgliedsanfragen von Institutionen akzeptieren oder verwerfen.

  1. Institution: Choose from the drop-down menu to which institution you wish to add people. If there is only one institution, its name will be displayed without the drop-down menu.

  2. People to display: Choose People who have requested institution membership.

  3. Add new members: You can search for people in the search box if there are too many names listed.

  4. People who have requested membership: Select the people you wish to add to the institution.

  5. Add the people by clicking the right-arrow button .

  6. People to be added / rejected: If you put people into the box for people to be added / rejected by accident, you can remove them from that list by clicking on them.

  7. Klicken Sie auf den Pfeil nach links-Button und er wird wieder von der Liste entfernt.

  8. Wenn Sie alle Mitglieder bearbeitet haben, klicken Sie auf den Mitglieder hinzufügen-Button.

  9. Alternatively, if you wish to decline people‘ membership, you can select them and then send a general denial by clicking the Decline requests button.

11.6.7.2. Personen, die bisher keine Mitgliedschaft beantragt haben

An admin can also take the initiative and invite or add people to an institution.

Invite or add people to become institution members

Invite or add people to become institution members

  1. Institution: Choose from the drop-down menu to which institution you wish to invite / add people. If there is only one institution, its name will be displayed without the drop-down menu.

  2. People to display: Choose People who have not requested membership yet.

  3. Invite people to join the institution: You can search for people in the search box if there are too many names listed.

  4. Non-members: Select the persons you wish to invite to the institution.

  5. Add the peoples to the list People to be invited by clicking the right-arrow button .

  6. If you put a person into the box for people to be invited by accident, you can remove them from that list by clicking on them.

  7. Klicken Sie auf den Pfeil nach links-Button und er wird wieder von der Liste entfernt.

  8. When you have all the members you wish to invite to the institution, click the Invite people button. The invitees receive a notification and can accept or decline the institution membership invitation.

  9. Alternatively, if you are a site administrator, you can click the Add members button add people directly to the institution without asking them first.

11.6.7.3. Personen, die die Institution verlassen haben

An administrator can filter people by the previous institution to which they were attached in order to find them more quickly.

Bemerkung

Dies ist nur bei Mehrmandanten-Mahara-Installationen mit mindestens zwei Institutionen von Bedeutung.

Invite / add people who had left an institution

Invite or add people to become institution members when they had left an institution

  1. Institution: Choose from the drop-down menu to which institution you wish to invite / add people. If there is only one institution, its name will be displayed without the drop-down menu.

  2. People to display: Choose People who have left a given institution. ‚Left‘ is interpreted loosely, it also means when an administrator removed them from an institution.

  3. Previous institution: Choose the institution from which you want to add people. They must have left it first to be listed here.

  4. Invite people to join the institution: You can search for people in the search box if there are too many names listed.

  5. People who have left institution [name of the institution]: Select the people you wish to invite or add to the institution listed.

  6. Add the people to the list People to be invited by clicking the right-arrow button .

  7. If you put a person into the box for people to be invited by accident, you can remove them from that list by clicking on them.

  8. Klicken Sie auf den Pfeil nach links-Button und er wird wieder von der Liste entfernt.

  9. When you have all the members you wish to invite to this institution, click the Invite people button. The invitees receive a notification and can accept or decline the institution membership invitation.

  10. Alternatively, if you are a site administrator, you can click the Add members button add people directly to the institution without asking them first.

Bemerkung

Mahara keeps track of the last institution of a person via an invisible tag.

11.6.7.4. Personen, die bereits Mitglied der Institution sind

You can remove members from an institution, e.g. if they are no longer students at a school or university, but should still have an account on Mahara or when they are just switching institutions on the same Mahara instance.

Remove members from an institution

Remove members from an institution

  1. Institution: Wählen Sie aus dem Drop-down-Menü aus welcher Institution Sie Mitglieder auswählen möchten. Wenn nur eine Institution existiert, wird ihr Name an Stelle des Drop-down-Menüs angezeigt.

  2. People to display: Choose People who are already institution members.

  3. Remove people from the institution: You can search for members in the search box if there are too many names listed.

  4. Current members: Select the members you wish to remove from the institution.

  5. Add them to the list Members to be removed by clicking the right-arrow button .

  6. If you put a person into the box for members to be removed by accident, you can remove them from that list by clicking on them.

  7. Klicken Sie auf den Pfeil nach links-Button und er wird wieder von der Liste entfernt.

  8. When you have all the members you wish to remove from your institution, click the Remove people button.

11.6.7.5. Personen, die in die Institution eingeladen wurden

An administrator can uninvite people from an institution.

Uninvite people from joining your institution

Uninvite people from joining your institution

  1. Institution: Choose from the drop-down menu which institution’s invited people you wish to display. If there is only one institution, its name will be displayed without the drop-down menu.

  2. People to display: Choose People who have been invited.

  3. Revoke invitations: You can search for people in the search box if there are too many names listed.

  4. Invited people: Select the people you wish to univite from joining your institution.

  5. Add the people to the list People to be uninvited by clicking the right-arrow button .

  6. If you put a person into the box for people to be uninvited by accident, you can remove them from that list by clicking on them.

  7. Klicken Sie auf den Pfeil nach links-Button und er wird wieder von der Liste entfernt.

  8. When you have all the people you wish to uninvite from the institution, click the Revoke invitations button.

11.6.8. Mitarbeiter/innen der Institution

You can give members staff rights in an institution in which they are members. The staff role will allow them to create course groups for example. This page allows you to do that in bulk for many members at once.

Siehe auch

You can also give staff rights on the person’s account settings page.

Give members institution staff rights

Give members institution staff rights.

  1. Institution: Choose the institution from the drop-down menu for which want to give staff rights to members. If there is only one institution, its name will be displayed without the drop-down menu.

  2. Site staff: You can search for people in the search box if there are too many names listed.

  3. Institutionsmitglieder: Wählen Sie die Mitglieder der Institution aus, denen Sie Mitarbeiter/innen-Rechte geben wollen.

  4. Add the people to the list Institution staff by clicking the right-arrow button .

  5. If you put a person into the institution staff list by accident or want to remove existing staff members and return them to normal membership status, select them.

  6. Klicken Sie auf den Pfeil nach links-Button und er wird wieder von der Liste entfernt.

  7. Wenn Sie alle Mitglieder hinzugefügt haben, klicken Sie auf den Bestätigen-Button.

11.6.9. Administrator/innen der Institution

You can give members administrator rights in an institution in which they are members. The administrator role will allow them to manage others in their own institution. This page allows you to do that in bulk for many people at once.

Siehe auch

You can also give admin rights on the person’s account settings page.

Give members institution admin rights

Give members institution admin rights.

  1. Institution: Choose the institution from the drop-down menu for which want to give admin rights to members. If there is only one institution, its name will be displayed without the drop-down menu.

  2. Admin users: You can search for people in the search box if there are too many names listed.

  3. Institution members: Select the institution members who shall get administrator rights.

  4. Add the member to the list Current administrators by clicking on the right-arrow button .

  5. If you put a person into the institution administrator list by accident or want to remove existing administration members and return them to normal membership status, select them.

  6. Klicken Sie auf den Pfeil nach links-Button , um sie von der Liste zu entfernen.

  7. When you have all the members you wish to have as administrators in the institution, click the Submit button.

11.6.10. Benachrichtigungen für Administrator/innen

Administration menu → Institutions → Admin notifications

The Admin notifications page lists all people with institution and site administrator access on your site. It shows their selected notification preferences for all admin notifications. There should be at least one administrator receiving each type of message generated.

Bemerkung

Institutionsadministratoren sehen nur Administrationsbenachrichtigungen ihrer eigenen Institution.

Administrationsbenachrichtigungen sind:

  • Kontaktieren Sie uns!

  • Anstößiger Inhalt

  • Wiederholter Virenupload

  • Virenkennung Freigabe

  • Objectionable content in forum

Übersicht über die  Benachrichtigungstypen für Admins

Übersicht über die Benachrichtigungstypen für Admins

11.6.11. Profil-Vollständigkeit

Administration menu → Institutions → Profile completion

Profile completion lets you select content that members of an institution need in order to have a ‚completed‘ profile. The parameters for a completed profile can differ from one institution to another. In some cases you can also decide how many content items a person needs of a specific artefact type to complete their profile.

Siehe auch

The site administrator needs to enable the profile completion feature in the account settings for institutions to be able to use it.

Profil-Vervollständigung für Institution aktivieren

Profil-Vervollständigung für Institution aktivieren

  1. Institution: If you administer more than one institution, select the one for which you want to set up the profile completion from the drop-down menu. If there is only one institution, its name will be displayed without the drop-down menu.

  2. Profile completion preview: Once you clicked the Submit button, you will see a preview of the progress bar that is displayed to your institution members in the sidebar.

  3. Profile: Set the switches to ‚Yes‘ for the items that you want your members to fill in from their profile. Select the number of groups a person should join or number of friends a member of your institution should make.

  4. Résumé: Set the switches to ‚Yes‘ for the résumé items that a person should fill in to have a completed profile.

  5. Plans: Select the number of plans and tasks a person should have from the drop-down menus.

  6. Journals: Select whether a person needs to have a certain number of journal entries for a complete profile.

  7. Files: In this section you can decide whether a person needs to upload a certain number of files. You can also specify the file type and decide how many items of each file type a person should upload for a complete profile.

  8. Annotation: Select from the drop-down menu the number of comments a person should make on annotations to gain a completed profile.

  9. Comment: Select from the drop-down menu the number of comments a person should make to gain a completed profile.

  10. Klicken Sie auf den Bestätigen-Button, um Ihre Änderungen zu speichern.

11.6.12. Institution pages and collections

Administration menu → Institutions → Pages and collections

You can create pages and collections for your entire institution. Although you could always create portfolios under a regular account that others could copy into their own portfolio, the advantage of institution pages and collections is that new members in the institution can receive a copy upon joining the institution.

Creating and editing an institution portfolio is very similar to creating and editing a personal portfolio. However, not all blocks are available when editing an institution page due to the different context. Please refer to the overview of blocks for a list of all the blocks that you can use in an institution page.

Manage institution pages and collections

Manage institution pages and collections

  1. Institution: If you administer more than one institution, select the one for which you want to create or edit pages. If there is only one institution, its name will be displayed without the drop-down menu.

  2. Click the Add button to start a new page or collection from scratch.

    Bemerkung

    A modal opens in which you can choose whether to create a page or collection.

    add page or collection

  3. Click the Copy button to choose an existing page or collection as basis.

  4. Search: Type your search term into the search field.

  5. Use the drop-down arrow to limit your search. The available options are:

    • Title, description, tags: Search for your search term in the title, descirption, and tags of your site portfolios.

    • Title, description: This is the default option. It searches in the title and description of your site portfolios.

    • Tags: Search only within the tags of your site portfolios.

  6. Sort by: Decide on the sort order in which you wish to display your portfolios.

    • Alphabetical: Portfolios are displayed in alphabetical order.

    • Date created: List the portfolios in chronologically reverse order with the newest portfolios first.

    • Last modified: Display the portfolios in the order of their last modification with the most recent portfolios that have been changed first. This is the default display option.

    • Last viewed: Show the portfolios in the order in which they were viewed by you and others starting with the most recently viewed portfolios.

    • Most visited: Display the portfolios that have been visited most first in the list.

    • Most feedback: List the portfolios in descending order based on the amount of feedback they have received.

    Bemerkung

    The sort order that you choose does not change when you navigate away from the overview page or log out. When you change the sort order, that new setting will be used until you change it again.

  7. Click the Search button to search your site portfolios based on your search term and / or sorting criteria.

  8. Edit your institution pages and collections as usual.

Bemerkung

When somebody leaves comments on an institution page or artefact, the institution and site administrators receive a notification.

11.6.13. Institution journals

Administration menu → Institutions → Journals

You create institution journals like regular personal journals. Institution journals allow you to create a journal template and then copy that into personal accounts for example. They also allow you to create a news blog for your institution.

Institution journals

Institution journals

  1. Institution: If you administer more than one institution, select the one for which you want to create or update a journal. If there is only one institution, its name will be displayed without the drop-down menu.

  2. You can create multiple journals. Click the Create journal button to set up a new journal.

  3. All your journals are listed on Administration menu → Institutions → Journals with their titles. The titles link through to the individual journals.

  4. You can see the description of the journal.

  5. You see how many entries you have in each journal.

  6. Click the Arrow icon to be taken to the journal and see all journal entries.

  7. Click the New entry button to create a new journal entry directly from this screen.

  8. Click the Edit button to make changes to your journal title, description or tags.

  9. Click the Delete button to delete the journal and all its entries.

Warnung

When you click the Delete button, you receive a confirmation message whether you really want to delete the journal or not. If you used the journal or an entry of it in a page, Mahara lets you know so you can decide whether to delete the journal or not. Once you agree to delete the journal, your journal and all its content are removed permanently.

11.6.14. Institutionsansichten und -sammlungen freigeben

Administration menu → Institutions → Share

Sie sehen eine Übersicht aller Institutionsansichten und -sammlungen der gewählten Institution.

Institutionsansichten und -sammlungen freigeben

Institutionsansichten und -sammlungen freigeben

  1. Institution: If you administer more than one institution, select the one for which you want to change sharing permissions for pages or collections. If there is only one institution, its name will be displayed without the drop-down menu.

  2. Select whether you want to change permissions for a collection or a page.

    Bemerkung

    You can select more collections or pages on the following screen.

  3. Collection / page name: All collections or pages for that institution are listed here.

  4. Zugriffsliste: Zeigt die Zugriffsberechtigungen für Ansichten und Sammlungen.

  5. Click the Edit access icon to change the permissions of who can view and copy a page or collection.

  6. Click the Edit Secret URL icon to define a secret URL for a page or collection.

Das Freigeben einer Institutionsansicht oder Sammlung ähnelt dem Vorgang zum Freigeben einer Portfolioansicht oder - sammlung. Der einzige Unterschied besteht darin, dass Sie neuen Institutionsmitgliedern ermöglichen direkt eine Kopie bei der Aufnahme in die Institution zu erhalten.

Einstellung für Kopien von Institutionsansichten für neue Institutionsmiglieder

Einstellung für Kopien von Institutionsansichten für neue Institutionsmiglieder

  1. When you clicked the Edit access icon on the Share page for institution pages and collections, click the Advanced options link and change the switch for Allow copying to ‚Yes‘. This now allows everyone who has access to the selected page(s) or collection(s) to copy them.

  2. Copy for new members: Enable this option if all new members in your institution shall receive a copy of the selected page(s) or collection(s) into their portfolios when an account is created for them.

    Bemerkung

    If you enable this option without also enabling the option ‚Allow copying‘, your existing members will not be able to make a copy of the page(s) or collection(s) themselves if they need another one.

  3. Klicken Sie auf den Speichern-Button am Fuß der Seite, um die Änderungen zu speichern.

When site administrators create and share an institution page or collection, they can share it with the members of the institution in which they created the page or collection.

11.6.15. Dateien

Administration menu → Institutions → Files

Der Dateibereich einer Institution enthält alle Dateien, die von Administratoren als Institutionsdateien hochgeladen wurden. Der Upload von Dateien erfolgt wie unter persönlicher Dateibereich beschrieben.

Dateibereich der Institution

Dateibereich der Institution

11.6.16. Tags

Administration menu → Institutions → Tags

11.6.16.1. Manage institution tags

Manage institution tags

Manage institution tags

  1. Institution: If you administer more than one institution, select the one for which you want to manage tags. If there is only one institution, its name will be displayed without the drop-down menu.

  2. Click the Create tag button to set up a new tag.

  3. Tag: Lists all the tags created in this institution.

  4. Times used: Displays the number of times the tag has been used by institution members.

  5. Click the Delete button to remove a tag.

  6. If a tag is currently in use, you cannnot delete it.

11.6.16.2. Create an institution tag

Create an institution tag

Create an institution tag

  1. Click the Create tag button on the Tags page to set up a new tag.

  2. Institution tag: Enter a new institution tag. It can consist of multiple words.

  3. Click the Save button to save this new tag or click Cancel to abort the action.

11.6.16.3. Use an institution tag

Use institution tags

Use institution tags

You can use tags from the institution to which you belong anywhere you can enter tags.

  1. Click into the tag search box and start typing a couple of letters of the tag you are looking for. The search narrows down to the potential tags

  2. Institution tags are prefixed with the institution’s name.

  3. You see the actual tag after the institution name including how many times you have used it.

11.6.17. Ausstehende Registrierungen

Administration menu → Institutions → Pending registrations

When you turn on Confirm registration for an institution in the institution settings, no account in this institution is created without the administrator knowing it. If a person is rejected, no account is created. If the option Confirm registration is not turned on, an account is created in the ‚No institution‘ institution but not in the actual institution.

Hier der Prozess der Selbstregistrierung mit aktiver Funktion Registrierungen bestätigen.

11.6.17.1. Selbstregistrierung für internen Account

When people try to self-register for your institution, they must provide certain details.

Bemerkung

Die Felder für E-Mail, Vor- und Nachname können in veränderter Reihenfolge erscheinen wenn die Einstellungen des erweiterten Spam-Schutzer aktiviert wurden.

Self-registration for an institution

Self-registration for an institution

  1. Vorname: Tragen Sie Ihren Vornamen ein.

  2. Nachname: Geben Sie Ihren Nachnamen an.

  3. E-Mailadresse: Tragen Sie Ihre E-Mailadresse ein.

  4. Institution: Wählen Sie die Institution in der Sie sich registrieren wollen. Es wird Ihnen angezeigt wenn die gewählte Institution Ihre Registrierung vor der Freigabe bestätigen muss.

  5. Registration reason: If administrator approval is required, you must provide a reason why you want to join the institution.

  6. You may need to accept one or more privacy statements if the site has ‚Strict privacy‘ turned on or requires that the ‚Registration agreement‘ is accepted.

  7. You may need to accept one or more terms and conditions for the site. If the institution you are registering for has additional terms and conditions to the general site ones, they will be in the institution terms and conditions.

  8. Klicken Sie auf den Registrieren-Button.

  9. Die Administratoren der Institution und die Site-Administratoren erhalten eine Benachrichtigung über ausstehende Registrierungen. Sie können diese dann überprüfen.

  10. If your account is approved, you will receive an email which includes a link to confirm your email address. You must click that link within 24 hours. If you do not, you will have to start the registration process again from the beginning.

11.6.17.2. Ausstehende Registrierungen ansehen

As administrator, you can view pending registrations for your institutions on the Pending registrations page in Administration menu → Institutions → Pending registrations.

Pending registration page

Auf Bestätigung wartende Registrierungen

  1. Institution: If you administer more than one institution, select the one for which you want to review pending registrations. If there is only one institution, its name will be displayed without the drop-down menu.

  2. Ausstehende Registrierungen: Sie sehen hier eine Liste der ausstehenden Registrierungen mit Namen und E-Mailadresse.

  3. Registrierungsgründe: Die Gründe für die Registrierung werden angezeigt.

  4. Expires: The time by which an administrator needs to approve this registration.

  5. Klicken Sie auf den Bestätigen-Button wenn Sie Registrierungsanfragen bestätigen wollen. Die Bestätigung muss auf der Folgeseite nochmals bestätigt werden. Die beantragende Person erhält nun eine E-Mail mit einem Link zum Abschließen des Registrierungsprozesses.

  6. Klicken Sie auf den Ablehnen-Button wenn Sie die Registrierung zurückweisen wollen und kein Account in der Institution angelegt werden soll.

When you approve accounts, you can decide whether they should receive staff rights immediately. For example, this helps to give all teachers at a school staff access rights upon their self-registration.

Approve a pending registration

Approve a pending registration

  1. Registration message: Send a message to the person whose account you are approving. This can be a welcome message or additional information to get them started.

  2. Institution staff: Switch to ‚Yes‘ if the person shall have staff access rights.

  3. Click the Approve button when you want to approve this registration request or click Cancel to abort the approval process.

You can see the time by which the registering person needs to complete the registration process.

Pending registration: Waiting on account registration completion

Pending registration: Waiting on account registration completion

  1. Expires: The date and time by which a self-registering person needs to complete the registration process.

  2. Indicator stating that the self-registering person needs to complete the registration.

Wenn Sie eine Person zurückweisen, können Sie hierfür einen Grund angeben.

Reason for denying institution membership for a self-registering person

Reason for denying institution membership for a self-registering person

  1. Ablehnungsgrund: Tragen Sie einen Grund für die Ablehnung der Registrierung an, damit die Person dies nachvollziehen kann.

  2. Click the Deny button to send a notification to the person’s email address with the reason for the denial or click Cancel to abort the denial process.

11.6.17.3. Selbstregistrierung abschließen

When people are accepted as members in an institution via this process, they must still complete the registration process. This is necessary to provide information in all required fields besides a password and a username.

Selbst-Registrierung für Institution abschließen

Selbst-Registrierung für Institution abschließen

  1. Neuer Nutzername: Wählen Sie Ihren neuen Nutzernamen. Ein Vorschlag wird erstellt, Sie können sich aber einen eigenen wählen. Sollte der selbstgewählte Nutzername bereits von einem anderen Nutzer/in verwendet werden, erhalten Sie nach der Eingabe einen Hinweis.

  2. Neues Passwort: Wählen Sie ein Passwort für Ihren Account. Pflichtfeld.

  3. Passwort bestätigen: Tragen Sie das Passwort ein zweites Mal ein. Dieser Eintrag ist erforderlich.

  4. Klicken Sie nun noch auf den Bestätigen-Button, um die Registrierung abzuschließen. Auf der folgenden Seite finden Sie Ihr Dashboard.

11.6.18. Pending deletions

Administration menu → Institutions → Pending deletions

When the site administrator required all institutions to review account deletions in the site configuration or an institution administrator required it for their institution in the institution settings, members cannot delete their accounts immediately. Instead, an administrator needs to approve or deny the request.

When a person requested that their account be deleted, the institution or site administrator receives a notification.

Pending account deletion page

Pending account deletion page

  1. Institution: If you administer more than one institution, select the one for which you want to review pending deletions. If there is only one institution, its name will be displayed without the drop-down menu.

  2. Pending deletion: The name of the person who wants to delete their account is displayed.

  3. Deletion reason: The reason for the deletion is shown.

  4. Click the Approve button when you want to approve the account deletion. You will have to confirm this decision on the next page. The person will receive an email to their primary email address stored in Mahara when the deletion has been completed.

    Warnung

    Account deletion is permanent and content cannot be retrieved easily once an account has been deleted. Once you approve the account deletion, it will happen immediately.

  5. Click the Deny button when you do not want the account to be deleted right away. You will need to provide a reason for your decision so that the person can get in touch with you to discuss it.